Running Scheme
This page is organized as follows:
Running Scheme on Departmental Unix Machines
Revisions and web formatting for this page were done by Curtis Clifton.
The departmental Unix machines are the recommended platforms for course work.
This section is organized as follows:
We recommend using the Chez Scheme interpreter in 342. However, you will need to read the SCM part first.
Starting SCM
The Unix SCM interpreter is found in /usr/unsup/bin or /usr/local/bin, so you must have the appropriate directory in your shell PATH for the interpreters to work. (But this is the default on the department servers, so you shouldn't have to do anything special to set this up.)
To start SCM type the following at the shell's prompt:
% scm
Note: In code examples, green text is program output, yellow bold text is user input, and cyan text is sample code.
and then hit the "return" (or enter) key. Be sure your input is in lower case (NOT CAPITALIZED). You will see something like the following:
SCM version 5d3, Copyright (C) 1990-1999 Free Software Foundation. SCM comes with ABSOLUTELY NO WARRANTY; for details type `(terms)'. This is free software, and you are welcome to redistribute it under certain conditions; type `(terms)' for details. ;loading /usr/local/scheme/scm/slib/require ;done loading /usr/local/scheme/scm/slib/require.scm ;loading /usr/local/scheme/scm/Transcen ;done loading /usr/local/scheme/scm/Transcen.scm >
with the prompt > indicating that SCM is waiting for your input.
Now type your input, followed by a return. For example:
> (+ 2 3)
results in:
5
Starting Chez Scheme
The Chez Scheme interpreter, scheme, is found in /usr/unsup/bin or /usr/local/bin, so you must have the appropriate directory in your shell PATH for the interpreters to work. (But this is the default on the department servers, so you shouldn't have to do anything special to set this up.)
To start Chez Scheme type the following at the shell's prompt:
% scheme
Other operations of Chez Scheme are exactly the same as for SCM, although Chez Scheme has various advantages.
Working With Scheme
Exiting Scheme
To exit either scheme interpreter type:
> (exit)
or type a control-d.
Making a Transcript
To record your session with a Scheme interpreter in a file named trans.out, that is to put your inputs and its outputs in the file trans.out, type the following to Scheme:
> (transcript-on "trans.out")
This must be typed exactly as above, with the double quotes ("). To make a transcript in some other file, write that name instead of trans.out.
Loading Files
It is very convenient to put your code for Scheme programs in files, and have Scheme read those files. A standard way to have Scheme read a file is to use the load procedure. The advantage of this is that load can be called from a program; for example, you can have one file that loads several others. Another advantage is that you can use load after you have already started Scheme. An example of using load after starting Scheme is as follows:
> (load "foo.scm")
If your files have errors you will see an error message; for example,
> (load "foo.scm")
;loading foo.scm
"foo.scm", line 2: ERROR: list: end of file in (2)
is an error message that means that foo.scm is missing one or more right parentheses (a common mistake).
In SCM, you can also load files by simply listing the files you want to load on the command to start Scheme. For example, using scm to read in files named foo.scm and bar.scm, you would type at the operating system prompt:
% scm foo.scm bar.scm
We will use this trick to load some files by default whenever you start a Scheme interpreter. A standard way to do this is part of setting up your account for this course and is covered in Homework 0.
(Should you need to make such a script for yourself, you could proceed as follows. Make a shell script, say ~/bin/myScm, containing the following line.
exec scm file-I-always-load.scm
"$@"
The line says to start Scheme and load the file file-I-always-load.scm and then any other files you specify on the command line. Be sure that there is a newline following this line. Remember to change the Unix file mode (permissions) on the shell script file you just created to make it executable. Suppose you called the shell script myScm (don't call it scm or scheme!), then you would execute the following:
% chmod +x ~/bin/myScm
To check that this has been set up properly, try the following from the Unix shell.
% rehash
% which myScm
% echo ~/bin/myScm
The responses to the last 2 commands should be the same. Note, this will not affect any scheme interpreters that you already have running.)
Scheme Advanced Topics
See the resources page for more about Scheme.
Editing Scheme Files
Editing Scheme Files With Emacs
Of the standard Unix editors, emacs has the best support for Scheme programming (and for other programming languages also). In addition to matching parentheses (when you type ) it shows which ( matches it) for you, emacs knows how to indent Scheme programs to make them look good. But before emacs will do this for you, it must know that you are editing a Scheme program. The best way to tell emacs that you are editing a Scheme program is to use the customizations found in the file $PUB/docs/sample-.emacs.
Either copy that into your file "~/.emacs", or edit the relevant lines into your file "~/.emacs".
With the relevant customization of your file ~/.emacs, when you are editing a file whose name ends in ".scm" (or ".ss" or ".def") then that is a Scheme file.
Be sure that all your Scheme file names end in ".scm" ! For example "member.scm" is a good name, but not "homework".
To find out about scheme-mode in emacs, edit a scheme file and then type C-h m (that is, control-h and then "m"). You will see a table of commands that looks like the following (which has been simplified; what you see in emacs by typing C-h m is the truth).
key binding --- ------- RET newline-and-indent C-j newline C-c Prefix Command C-x Prefix Command ESC Prefix Command DEL backward-delete-char-untabify C-c C-k scheme-compile-file C-c C-l scheme-load-file C-c C-z switch-to-scheme C-c C-c scheme-compile-definition-and-go C-c C-r scheme-send-region C-c ESC Prefix Command C-c C-e scheme-send-definition C-x C-e scheme-send-last-sexp ESC C-x scheme-send-definition ESC C-q indent-sexp C-c ESC c scheme-compile-definition C-c ESC r scheme-send-region-and-go C-c ESC e scheme-send-definition-and-go
For example, if you type C-x C-e (control-x and then control-e), it sends the previous s-expression (a parentheses balanced thing you typed) to the Scheme process.
Interacting With Scheme From Emacs
To run Scheme from within Emacs, start emacs, and then use the command M-x run-scheme. (That is, press the ESC key, then x then at the prompt run-scheme ). This will create a buffer called *scheme*, which will be in "inferior scheme mode". You will soon see the scheme system starting, just as if you had run it directly from the shell. (The name of the command run is given by the Emacs variable "scheme-program-name".) You can type expressions at the prompt, and then by pressing "return", you will see them evaluated. To find out about inferior scheme mode in emacs, from the *scheme* buffer type C-h m. You will see a table of commands that includes those in the table above, and some additional ones.
key binding --- ------- DEL backward-delete-char-untabify C-x Prefix Command C-d comint-delchar-or-maybe-eof RET comint-send-input C-c Prefix Command C-down comint-next-input C-up comint-previous-input ESC Prefix Command C-x C-e scheme-send-last-sexp C-c C-k scheme-compile-file C-c C-d comint-send-eof C-c C-p comint-previous-prompt C-c C-n comint-next-prompt C-c C-l scheme-load-file C-c C-e comint-show-maximum-output C-c C-r comint-show-output C-c C-o comint-kill-output C-c RET comint-copy-old-input C-c C-\ comint-quit-subjob C-c C-z comint-stop-subjob C-c C-c comint-interrupt-subjob C-c C-w backward-kill-word C-c C-u comint-kill-input C-c C-a comint-bol-or-process-mark C-c C-x comint-get-next-from-history C-c SPC comint-accumulate C-c ESC Prefix Command ESC C-q indent-sexp ESC C-x scheme-send-definition ESC C-l comint-show-output ESC s comint-next-matching-input ESC r comint-previous-matching-input ESC n comint-next-input ESC p comint-previous-input
The basic addition is that when you type a return (RET), what you typed is sent to the Scheme interpreter. You can edit the input using emacs commands, but note that whatever is on a line at the time you type return (RET) is sent to Scheme, and is not affected by further editing. However you can go back up in the buffer and send an edited expression again by placing your cursor just to the right of the last right parentheses, and typing return. Another handy feature is to use M-p (ESC then "p") which recalls a previous input you typed; you can do this several times to get earlier inputs. These earlier inputs can also be edited.
You do not need to separately exit Scheme and emacs, as exiting emacs will kill Scheme. (However, if you are using emacs to run Scheme at home from within Microsoft windows, it is best to exit Scheme before exiting emacs.)
The Scheme running under emacs does not automatically know about changes you make to Scheme code files or other emacs Scheme buffers. You have to either explicitly load the file (use load-file in Scheme as described above), or use a scheme-send command (such as C-x C-e) in the buffer where you are editing your code. (Note that these have to be in the same emacs process)
Editing Scheme With VI (BZZT!)
If you don't already know how to use vi, please don't learn it. The vi editor does not know how to format Scheme code (or for that matter C++). If you must use vi, invoke it with the "-l" option, which will make it match parentheses for you.
You can also use your vi keystrokes in emacs. To do this, simply execute
M-x viper-mode RET
when in emacs. See also the emacs help by typing
M-x help-for-help i
and then select the topic "Viper Mode" for more information. This allows you to use vi's editing commands, but all the features of emacs. It also allows you to use the mouse in this emulation, something you can't really do in vi.
If you decide you want to use viper-mode in emacs all the time, put the following line in your .emacs file.
(viper-mode)
Running Scheme on Your Home Machine
Getting SCM for your Home Machine
The SCM Scheme interpreter used for this course is available on many platforms, including Unix, most flavors of Unix, Macintosh, and Windows. You can download the files necessary for compiling SCM from MIT.
The default SCM package is supposed to be buildable on MacOS also. The course staff can probably answer some questions about installation on various platforms. However, our experience on other than Unix and Macintosh is limited and the information on the links above is authoritative.
Getting Chez Scheme for your Home Machine
A "petite" version of the Chez Scheme interpreter is free, for most flavors of Unix, and PCs running Windows. You can download it from Cadence Research Systems.
Getting Other Stuff for your Home Machine
In addition to the SCM or Chez Scheme interpreter you will also need a copy of SLIB; this is standard if you have installed SCM. Also, you need to get your own copy of the course Scheme library and the homework and shell script or batch files. See the course Scheme library page for details on how to do this.
To run shell scripts you may want to get Cygwin GNU software (bash, etc. for your home (Windows) machine.
Even better, you can get GNU Emacs for Windows NT and Windows 95/98.
Last modified Monday, February 23, 2004.
This web page is for the Spring 2004 offering of Com S 342 at Iowa State University. The details of this course are subject to change as experience dictates. You will be informed of any changes. Thanks to Curtis Clifton for help with these web pages. Please direct any comments or questions to Gary T. Leavens at leavens@cs-DOT-iastate-DOT-edu (after replacing -DOT- with `.').